Take Control of Your Southern California Edison Energy Costs
Solar • Tesla Powerwall • Battery Backup
If you're an Orange County homeowner served by Southern California Edison, choosing solar today is about much more than deciding how many panels will fit on your roof. A properly designed home-energy system should consider how much electricity your home uses, when you use it, how SCE values electricity sent back to the grid, whether battery storage makes sense, your backup-power goals and how your electricity needs may change in the future.
In this video, NationPro USA explains the relationship between SCE, solar panels, Tesla Powerwall and home battery storage so Orange County homeowners can better understand their options before making a decision.
Analyze My SCE BillElectricity is a long-term household expense. The question is not only what your SCE bill costs today, but how much electricity your home may purchase from the grid over the next 10, 15 or 20 years.
Generate electricity at home during daylight hours.
Power household loads directly from available solar production.
Store available excess solar energy for later use.
Reduce dependence on grid electricity based on system design.
Southern California Edison offers several residential rate structures. What a homeowner pays can depend on the rate plan, time of day, season, electricity usage and whether generation comes from SCE or a Community Choice Aggregator.
SCE's published tiered residential rates effective June 1, 2026 are approximately 30¢/kWh for Tier 1 and 40¢/kWh for Tier 2 for customers receiving both generation and delivery from SCE. New Solar Billing Plan customers operate under TOU-D-PRIME, SCE's Time-of-Use PRIME residential rate plan, where electricity prices vary by time of day and season, instead of this tiered structure.
Upload My SCE BillDuring daylight hours, solar panels convert sunlight into electricity. Your home can use that electricity as it is produced, store available excess energy in a battery, or export eligible excess energy to the grid.
Most new SCE residential solar customers are subject to California's current solar compensation structure, commonly called NEM 3.0. SCE calls this its Solar Billing Plan, and residential customers are placed on TOU-D-PRIME, SCE's Time-of-Use PRIME residential rate plan. Under a time-of-use plan, electricity prices vary depending on when energy is used, including the time of day and season.
Solar electricity directly serves household loads while it is being produced.
Eligible excess electricity sent to the SCE grid receives applicable Energy Export Credits. Credit values vary based on when energy is exported.
This changes how solar-system design should be approached. Rather than simply installing as many panels as possible, the objective should be understanding production, consumption, storage and timing.
Solar panels produce the most electricity while the sun is shining, but many homes continue using substantial energy later in the afternoon and evening. SCE says Solar Billing Plan customers are on TOU-D-PRIME, its Time-of-Use PRIME residential rate plan. Under this plan, electricity prices vary by time of day and season, and summer weekday prices are highest from 4 PM to 9 PM.
Solar generates electricity during daylight hours.
Available excess production can charge the battery.
Solar production falls as the sun goes down.
Battery energy can serve home loads according to system settings and configuration.
NationPro USA installs Tesla Powerwall solutions for Orange County homeowners looking to combine solar generation, energy storage and backup power.
Save available solar energy for later.
Use stored electricity after solar production declines.
Support configured home loads during qualifying outages.
Monitor solar, battery and home-energy flows.
One common misconception is that rooftop solar automatically keeps a home powered during an outage. Standard grid-connected solar generally shuts down when the grid is unavailable for safety reasons.
Solar panels alone do not automatically provide outage backup.
Backup capability depends on the equipment, system configuration and load design.
Backup duration depends on battery capacity, solar availability and how much electricity the home consumes.
The home begins using electricity generated by the solar system.
Solar can supply household loads and available excess production can charge the battery.
The home's electricity demand may continue even as solar output falls.
Stored electricity can be used according to Powerwall settings and system configuration.
A properly configured Powerwall system can provide backup power to configured home loads.
You do not necessarily need to start over. NationPro USA can evaluate an existing solar system for possible upgrades based on equipment compatibility, electrical configuration, roof condition and utility status.
The right solar system should not necessarily be designed only around how much electricity your home used last year. It should also consider how much electricity your home may use tomorrow.
Electric vehicles, EV chargers, heat-pump HVAC, heat-pump water heaters, pool equipment, ADUs and home additions can materially change household electricity consumption.
Tell NationPro about your future plans before we design the system.
Installing solar involves more than mounting panels. A residential project moves through design, local permitting, installation, inspection and utility interconnection steps.
Review SCE usage and design the proposed system.
Prepare the project for the applicable Orange County permitting authority.
Install the approved solar and battery equipment.
Complete applicable local inspection requirements.
Submit required utility documentation.
After applicable requirements are complete and SCE grants PTO, the interconnected system can operate under the approved utility arrangement.
NationPro manages the project from design through installation and the applicable interconnection process.
A low price does not necessarily mean a better solar system. Compare the equipment, design, financing, backup configuration, project scope and service, not only the number at the bottom of the proposal.
NationPro USA began in California more than 12 years ago. California remains a core market as installation capabilities have expanded.
NationPro USA is a Tesla Certified Installer offering Powerwall solutions.
Generation and storage are designed together around the homeowner's energy profile.
Roof condition and future electrical loads can materially affect the right energy design.
The process starts with household electricity consumption rather than a predetermined package.
Broader installation capabilities are combined with years of experience serving California homeowners.
NationPro USA serves homeowners throughout Orange County and surrounding SCE service areas. City pages will be linked only as full local resources are built.
Solar economics depend on electricity consumption, roof characteristics, solar production, system cost, financing, rate structure, battery configuration and the homeowner's long-term plans. NationPro begins by reviewing actual electricity usage before recommending a system.
Solar Billing Plan customers can use solar electricity directly at the home and receive Energy Export Credits when eligible excess electricity is exported to the grid. Export-credit values vary based on when energy is exported.
SCE states that Solar Billing Plan customers are placed on TOU-D-PRIME, SCE's Time-of-Use PRIME residential rate plan. Electricity prices on this plan vary by time of day and season.
Not every homeowner needs the same system. Battery storage can be useful for homeowners who want to store available solar production for later use or want backup-power capabilities.
Standard grid-connected solar generally shuts down during an outage. A properly configured solar + battery system can provide backup power to configured loads.
Tesla specifies 13.5 kWh of nominal battery energy for Powerwall 3.
Potentially. It depends on the HVAC equipment, starting requirements, Powerwall configuration and other loads operating simultaneously. The actual equipment should be reviewed before HVAC backup is promised.
Potentially. Compatibility depends on the existing solar equipment and electrical configuration. NationPro can evaluate the existing system.
Yes. EV charging becomes part of the home's overall electricity demand and should be considered when sizing a solar system.
If you reasonably expect electricity consumption to increase because of an EV or other electrification, tell the designer before the system is sized.
If the roof is approaching replacement, coordinating roofing and solar before installation can avoid unnecessary removal and reinstallation later.
The project requires applicable utility interconnection documentation in addition to local permitting and inspections. NationPro coordinates the applicable project process for its installations.
PTO means Permission to Operate. It is the utility authorization associated with operating the interconnected solar system after applicable requirements are completed.
There is no universal number. It depends on electricity consumption, panel wattage, available roof space, orientation, shading, expected solar production and future energy needs.

Send NationPro USA your electricity usage and we'll evaluate solar + battery options designed around your home.
Complete the form below for a personalized Orange County SCE solar + battery analysis.